You are here: Home > Helicopter > Electronics > Futaba S.Bus System
Sort By:
Page of 1
FUTL7668 R6208SB 2.4G FASST 8Ch/18Ch SBus Hi-Volt Rx FUTM0452  Futaba S9072SB Digital S.Bus Programmable Servo FUTM4190 Futaba SBC-1 S.Bus Channel Setting Tool
FUTL7668 R6208SB 2.4G FASST 8Ch/18Ch S.Bus Hi-Volt Rx
retail value: $169.99
sale Price: 129.99
You save $40.00!
FUTM0452 S9072SB S.Bus Digital Servo Programmable
retail value: $119.99
sale Price: 79.99
You save $40.00!
FUTM4190 SBC-1 S.Bus Channel Setting Tool
retail value: $34.99
sale Price: 29.99
You save $5.00!
FUTM4191 Futaba SBD-1 S.Bus Decoder 1600mm FUTM4192 Futaba SBD-1 S.Bus Decoder 1100mm FUTM4193 Futaba SBD-1 S.Bus Decoder 400mm
FUTM4191 SBD-1 S.Bus Decoder 1600mm
retail value: $69.99
sale Price: 62.99
You save $7.00!
FUTM4192 SBD-1 S.Bus Decoder 1100mm
retail value: $67.99
sale Price: 59.99
You save $8.00!
FUTM4193 SBD-1 S.Bus Decoder 400mm
retail value: $64.99
sale Price: 57.99
You save $7.00!
FUTM4195 Futaba S.Bus Hub with Cable 300mm FUTM4196 Futaba S.Bus Hub with Cable 1000mm FUTM4200 Futaba S.Bus Terminal Box 4-Way
FUTM4195 AEC33 S.Bus Hub w/Cable 300mm
retail value: $29.99
sale Price: 26.99
You save $3.00!
FUTM4196 AEC35 S.Bus Hub w/Cable 1000mm
retail value: $32.99
sale Price: 29.99
You save $3.00!
FUTM4200 FSH72 S.Bus Terminal Box 4-Way
retail value: $8.99
sale Price: 8.49
You save $0.50!
S.Bus System Revolutionary, cutting-edge technology!

Imagine the possibilities…

Imagine using one cable and one receiver to control up to 16 servos.
 Imagine being able to plug in battery packs anywhere you want. Imagine a system that simplifies setup,
 yet gives you more programming power at the same time.

You can stop imagining, because the S.Bus system can do it all – and more. And if you can imagine a system
 that can do so much, you can also guess which company has already made it a reality: Futaba.

Like digital servos, the GY520 Gyro and FASST™ radio systems, the S.Bus system is more than just a
 better product. It's a revolution in R/C science that redefines what radios can offer today –
while hinting at what tomorrow's systems will become.

What does the S.Bus system do?

The innovative Futaba S.Bus system lets you unleash your flight system's full potential and cut down
 on cable clutter at the same time. It uses digital serial data communication technology to transmit
control signals between your receiver and servos.

A single S.Bus cable can carry signals to as many channels as your transmitter can handle.
You no longer have to worry about plugging in the wrong servo to the wrong channel,
 because each servo knows what channel it is dedicated to in advance.

SBD-1 S.Bus Decoder Cables allow the use of existing analog and digital servos, too.
 By providing today's pilots with tomorrow's technology, the Futaba S.Bus system is nothing short
 of revolutionary – and the revolution's only beginning.

S.Bus Diagram


  • Eliminates clutter.

  • Easy programming with the SBC-1 Channel Setting Tool, S.Bus receivers or PCLink software.

  • No receiver channel limits (except by those on your transmitter).

  • Plug in battery packs anywhere you wish.

  • Heavy-duty 20-gauge wire.

  • SBD-1 decoder cables (sold separately) let you use existing analog and digital servos.

  • Prevents mismatched servo-channel connections.

  • S.Bus system accessories make any installation simple.

PCLink Software

PCLink Features:

  • Run multiple servos – using only a single channel on your transmitter!

  • Electronically adjust each individual servo with PCLink instead of using individual channels
  •  on your transmitter.

R6203SB 3/18 Channel S.Bus High Voltage Micro Receiver

FUTL7665R6203SB 3/18 Channel S.Bus High Voltage Micro Receiver

R6108SB 2.4G FASST 8/18 Channel S.Bus Hi Speed Receiver

Dimensions: 1-7/8 x 1 x 9/16 (47 x 25 x 14 mm)
R6108SB 8-Channel Programmable Receivert: 0.5 oz (14.0 g)

S9070SB Digital Servo
FUTM0S9070SB Digital S.Bus Programable Servo450
Volts Torque Speed
6.0V 76.4 oz-in (5.5 kg/cm) 0.12 sec/60°
7.4V 94.5 oz-in (6.8 kg/cm) 0.15 sec/60°
Dimensions Weight
1-7/16 x 13/16 x 1 in
(36 x 20 x 25 mm)
1.1 oz (32 g)
S9071SB Digital Servo
FUTM04 S9071SB Digital Servo51
Volts Torque Speed
4.8V 53 oz-in (4 kg/cm) 0.15 sec/60°
6.0V 64 oz-in (5 kg/cm) 0.11 sec/60°
Dimensions Weight
1-7/16 x 9/16 x 1-1/8 in
(36 x 15 x 29 mm)
0.9 oz (25 g)

S9072SB Digital Servo
FUTM0452 S9072SB Digital Servo
Volts Torque Speed
4.8V 97 oz-in (7.0 kg/cm) 0.12 sec/60°
6.0V 121 oz-in (9 kg/cm) 0.10 sec/60°
Dimensions Weight
1-9/16 x 13/16 x 1-7/16 in
(40 x 20 x 37 mm)
2 oz (57 g)
S3171SB Slim Digital Servo
FUTM046 S3171SB Slim Digital Servo1
Volts Torque Speed
4.8V 51 oz-in (4 kg/cm) 0.24 sec/60°
Dimensions Weight
1-3/16 x 7/16 x 1-1/8 in
(30 x 11 x 29 mm)
0.8 oz (20 g)

S9074SB Digital S.Bus Servo
FUTM0454 S9074SB Digital S.Bus Servo
Volts Torque Speed
6.0V 278 oz-in (20 kg/cm) 0.17 sec/60°
Dimensions Weight
1-9/16 x 13/16 x 1-7/16 in
(40 x 20 x 37 mm)
2.2 oz (63 g)
S9075SB Digital HT S.Bus Servo
FUTM0455 S9075SB Digital HT Programmable Servo
Volts Torque Speed
6.0V 425 oz-in (31 kg/cm) 0.14 sec/60°
Dimensions Weight
1-5/8 x 13/16 x 1-1/2 in
(41 x 21 x 38 mm)
2.5 oz (71 g)

S.Bus Accessories

SBC-1 S.Bus Channel Setting Tool
FUTM4190 SBC-1 S.Bus Channel Setting Tool

  • Provides additional available channels to your S.Bus system setup!
  • No more receiver channel limits (except those on your transmitter).

S.Bus Hub w/Cable
FUTM4195 S.Bus Hub w/Cable – 12 in (300 mm)
FUTM4196 S.Bus Hub w/Cable – 39 in (1000 mm)

  • Use S.Bus Hubs to connect servos to the S.Bus system.
  • Hubs also allow you to plug in additional remote battery packs – anywhere!
  • Two cable length options are available to fit all airplane sizes.

4-Way Terminal Box
FUTM4200 4-Way Terminal Box

  • Plug in servos, hubs, batteries and receivers* into the S.Bus system using the 4-Way Terminal Box!
*Receiver plug-in requires a male-to-male connector (sold separately).
SBD-1 S.Bus Decoder
FUTM4191 SBD-1 S.Bus Decoder – 63 in (1600 mm)
FUTM4192 SBD-1 S.Bus Decoder – 43 in (1100 mm)
FUTM4193 SBD-1 S.Bus Decoder – 16 in (400 mm)

  • Each SBD-1 S.Bus decoder includes 3 outputs.
  • Each output can be programmed to specific channels.
  • SBD Link software determines what channel each servo output responds to – preventing mismatched servo-channel connections.
  • Compatible with standard analog and digital servos – as well as programmable S.Bus system servos.