| Focus Shot1(ALIGN 50 HYPER ENGINE) |
Focus Shot2(50 High Performance Muffler) |
Focus Shot3(2 In 1 Voltage Regulator Combo) |
|
|
|
|
| Focus Shot4(High precision main rotor assembly and new main rotor holder) |
Focus Shot5(New sport flybar control set design) |
Focus Shot6(Tail rotor assembly with double bearings and heavy duty tail with thrust bearings) |
|
|
|
|
| Focus Shot7(New efficient Torque Tube driven tail design) |
Focus Shot8(New-sturdy lightweight main frame, fuel tank 440cc) |
Focus Shot9(Special H type mounting tray) |
|
|
|
|
| Focus Shot10(Clutch/Start shaft feature a 10mm ID one way bearing) |
Focus Shot11(Super efficient, lightweight engine cooling fan) |
Focus Shot12(Including Feul tube, Fuel filter, and New Fuel tube clip) |
|
|
|
|
| Focus Shot13(New Tail rudder rod system) |
Focus Shot14(New landing skid) |
Focus Shot15(Painted fiberglass canopy) |
|
|
|
|
| Package: |
|
|
| Instructions: |
Specification: |
|
Instruction Manual
●Features
1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful
factory painted fiberglass canopy. Canopy also features a rigid easy
clip on/off design for fast installation and removal.
2.Simple and light weight design provides awesome flight performance
nearly equal to larger helicopters while still maintaining very stable
hovering and flight.
3.+-14° collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Torque Tube driven tail for incredible 50 sized performance.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very
efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate
any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New flybar paddles feature light weight and sports.
21.New flybar control set design.
22.New tail boom supports.
|
●Length:1160mm
●Height:410mm
●Main Blade Length:600mm
●Main Rotor Diameter:1350mm
●Tail Rotor Diameter:240mm
●Engine Pinion Gear:20T
●Autorotation Tail Drive Gear:180T
●Drive Gear Ratio:8.1:1:4.5(E:M:T)
●Flying Weight:Approx. 3200g |
| Accessories: |
|
●T-REX 600 Nitro Pro Kits SetX1 set(w/o main blade)
●ALIGN 50 Hyper EngineX1
●50 High Performance MufflerX1
●2 In 1 Voltage Regulator ComboX1
●Painted fiberglass canopyX1
●Feul tubeX1
●Fuel filterX1
●New Fuel tube clip(A)X1
●New Fuel tube clip(B)X1
●New landing skidX1
Radio transmitter and electronic equipment required for assembly:
●Transmitter(6-channel or more, helicopter system)
●Receiver(6-channel or more)
●Standard servoX4
●Head lock gyroX1
●Specialized servoX1
●600 bladeX1set
●Pitch gaugeX1
●Engine starter/Starter shaftX1
●11.1~14.8V Li-Po 2500mAh starter batteryX1
●Fuel pumpX1
●Engine fuelX1 |
