You are here: Home > Helicopter > New Items
Sort By:
Page of 1
EFLB3002S35 300mAh 2S 7.4V 35C LiPo Battery H50186 Ball Link H50187 M2.5 socket collar screw
EFLB3002S35 300mAh 2S 7.4V 35C LiPo Battery
retail value: 21.99
available
H50186 Ball Link
retail value: 2.99
available
H50187 M2.5 socket collar screw
retail value: 1.99
available
   
H60246 Ball Link H45101A Metal Tail Belt Unit
H60246 Ball Link
retail value: 3.99
Call for availability
H45101A Metal Tail Belt Unit
retail value: 29.99
Call for availability
H25074A Tail Rotor Hub Set
retail value: 6.99
available
     
HN7019A M1 Main Drive Gear/115T HBP22001 3S1P 11.1V 2200mAh/30C
HN7019A M1 Main Drive Gear/115T
retail value: 16.99
Call for availability
HBP22001 3S1P 11.1V 2200mAh/30C
retail value: 32.99
Call for availability
H45038A Metal Tail Torque Tube Unit
retail value: 32.99
Call for availability
  ●This Li-poly battery features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 450 series and other professional model airplanes, cars, and guns.
●Max Continuous Discharge: 30C(66A), Burst Discharge: 40C(88A). Normal operating temperature is approx. 40-65C(within 80% of rated discharge). Max. temperature: 80C.
●Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

●Output:11.1V(3S1P) Nominal,2200mAh
●Dimension:104x36x22mm
●Weight:165g

NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.
 
H70089A 700DFC Main Rotor Head Upgrade Set H60244 600DFC Head Damper H70096 700DFC Head Damper
H70089A 700DFC Main Rotor Head Upgrade Set
retail value: 72.99
Call for availability
H60244 600DFC Head Damper
retail value: 6.99
available
H70096 700DFC Head Damper
retail value: 6.99
available
Another innovation from Alignfs R&D team: 700 DFC flybarless rotor head system.
700DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed.
700DFC not only improves on T-Rex700fs performance, the lower CG design is also capable of surprisingly fast speed, not to mention the extremely attractive design.

Features:
Extreme low CG and short main shaft design, dramatically reduces flight resistance, effectively improves T-Rex 700fs 3D performance and speed.
Two part detachable main blade grips for ease of maintenance and assembly.
New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid.
Upgrading to the 700DFC rotor head assembly is extremely easy; just replace the head block included in the 700DFC kit, replace the blade grip pitch lever with the new 700DFC lever, connect the 700DFC linkage assembly, and replace the main shaft with 700DFC main shaft. Existing swashplate and newer main rotor grips are kept in the upgrade.
Suitable for T-REX 700 flybarless system.

700 DFC Main Rotor Head Assembly(22x54x46mm) x 1
700N Feathering shaft sleeve-black(10.2x17x21mm) x 2
700 Damper rubber-black(9.9x17x7mm) x 2
M4 Set screw x 1
Socket collar screw(M4x24mm) x 1
Socket collar screw(M4x8mm) x 2
700DFC Main Blade Grip Arm(38.5x9x6mm) x 2
700DFC Main rotor grip arm integrated control link(9x15.1x38.2mm) x 2
700DFC Main rotor grip linkage bearing sleeve(3x4.8x9.1mm) x 2
683ZZ Bearing(3x7x3mm) x 4
700DFC Linkage rod A(M3x14mm) x 2
700N Elevator ball link x 2
700DFC Main Shaft(12x194.1mm) x 1
Socket collar screw(M3x6mm) x 4
M3 CNC socket collar screw(M3x24mm) x 2
Washer(3x4.8x0.3mm) x 2
   
H50181  500DFC Main Rotor Head Upgrade Set H50182 500DFC Main Rotor Housing Set H50183 500DFC Metal Main Rotor Holder Arm
H50181 500DFC Main Rotor Head Upgrade Set
retail value: 59.99
available
H50182 500DFC Main Rotor Housing Set
retail value: 22.99
available
H50183 500DFC Metal Main Rotor Holder Arm
retail value: 13.99
available
Instruction:
●Follow by 700 DFCs design, the 500 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimaginable flight speed with extremely attractive design.


Features:
●Extreme low CG and short main shaft design, dramatically reduces flight resistance, effectively improves T-Rex 500s 3D performance and speed.
●Two part detachable main blade grips for ease of maintenance and assembly.
●New style linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that is much simplified and rigid.
●Upgrading to the 500DFC rotor head assembly is extremely easy; just replace the head block included in the 500DFC kit, replace the blade grip pitch lever with the new 500DFC lever, connect the 500DFC linkage assembly, and replace the main shaft with 500DFC main shaft. Existing swashplate and newer main rotor grips are kept in the upgrade.
●Suitable for T-REX 500 flybarless system.

●500DFC Main Rotor Head Assembly x 1
●500 Feathering Shaft Sleeve x 1
●500 Damper rubber x 2
●M2.5 Set screw x 1
●Socket collar screw(M2.5x19mm) x 2
●Socket collar screw(M2.5x16mm) x 1
●500DFC Main Blade Grip Arm x 2
●500DFC Main rotor grip arm integrated control link x 2
●500DFC Main rotor grip linkage bearing sleeve x 2
●682ZZ Bearing(Φ2.5xΦ6x2.6mm) x 4
●500DFC Linkage rod A(M2.5x12mm) x 2
●600PRO Elevator ball link x 2
●500DFC Main Shaft x 1
●Socket collar screw(M3x6mm) x 4
●250 Feathering shaft washer x 2
   
H50184 500DFC Main rotor grip arm integrated control link set H50185 500DFC Main Shaft H60239A 600DFC Main Rotor Head Upgrade Set
H50185 500DFC Main Shaft
retail value: 14.99
Call for availability
H60239A 600DFC Main Rotor Head Upgrade Set
retail value: 69.99
available
     
H60241 600DFC Main Rotor Holder Arm H60242 600DFC Main rotor grip arm integrated control link set
H60240 600DFC Main Rotor Housing/Black
retail value: 26.99
Call for availability
H60241 600DFC Main Rotor Holder Arm
retail value: 17.99
available
     
H60243 600DFC Main Shaft H70091 700DFC Main Rotor Housing Set H70092 700DFC Main rotor grip arm integrated control link set
H60243 600DFC Main Shaft
retail value: 16.99
available
H70091 700DFC Main Rotor Housing Set
retail value: 29.99
available
     
H70093 700DFC Main Shaft H70094 M3 CNC socket collar screw H70095 700DFC Main Rotor Holder Arm
H70093 700DFC Main Shaft
retail value: 17.99
available
H70094 M3 CNC socket collar screw
retail value: 3.99
available
H70095 700DFC Main Rotor Holder Arm
retail value: 19.99
available
     
HN6102AA 600 Elevator Arm Set/Black HN6102AF 600 Elevator Arm Set/Silver H11013A 100X Vertical Stabilizer
HN6102AA 600 Elevator Arm Set/Black
retail value: 32.99
Call for availability
HN6102AF 600 Elevator Arm Set/Silver
retail value: 32.99
Call for availability
H11013A 100X Vertical Stabilizer
retail value: 3.99
Call for availability
     
H11015A 100X Complete Tail Assembly H11006A 100X Flybar Rod assembly H11020A 100 Screw Parts
H11015A 100X Complete Tail Assembly
retail value: 8.99
Call for availability
H11006A 100X Flybar Rod assembly
retail value: 5.99
Call for availability
H11020A 100 Screw Parts
retail value: 3.99
Call for availability
     
HS1294AA 450 Landing Skid Set/Black HS1294A 450 Landing Skid Set/White HEG79001 GP790 Head Lock Gyro
HS1294AA 450 Landing Skid Set/Black
retail value: 7.99
available
HS1294A 450 Landing Skid Set/White
retail value: 7.99
Call for availability
HEG79001 GP790 Head Lock Gyro
retail value: 98.99
Call for availability
     
KX022008 T-REX 100X KX019011 T-REX 250 PRO DFC Super Combo EFLB1501S25 150mAh 1S 3.7V 25C LiPo Battery
KX022008 T-REX 100X
retail value: 99.99
Call for availability
KX019011 T-REX 250 PRO DFC Super Combo
List Price: $486.99
retail value: $486.99
sale Price: 419.99
You save $67.00!
available
  the first flybarless complete 250 w/ 3gx
redesigned improvements over the 250 pro
HN7002A One-way Bearing Set KX022005A T-REX 100X Super Combo H45158 Tail Linkage Rod
HN7002A One-way Bearing Set
retail value: 88.99
available
KX022005A T-REX 100X Super Combo
retail value: 109.99
Call for availability
H45158 Tail Linkage Rod
retail value: 3.99
Call for availability
     
H45159 Motor Pinion Helical Gear 12T H25017 Main Drive Gear/120T H25017 HD200A 205 Carbon Fiber Blades
H45159 Motor Pinion Helical Gear 12T
retail value: 4.99
Call for availability
H25017 Main Drive Gear/120T H25017
retail value: 8.99
Call for availability
HD200A 205 Carbon Fiber Blades
retail value: 13.99
Call for availability
     
H45155 Tail Boom H45154 Stabilizer/1.2mm H45153 Sport V2 Tail Linkage Rod
H45155 Tail Boom
retail value: 6.99
available
H45154 Stabilizer/1.2mm
retail value: 8.99
Call for availability
H45153 Sport V2 Tail Linkage Rod
retail value: 3.99
available
     
H45108QN Skid Pipe H45157 Motor Pinion Helical Gear 12T H45156 Slant Thread Main Drive Gear/121T
H45108QN Skid Pipe
retail value: 3.99
Call for availability
H45157 Motor Pinion Helical Gear 12T
retail value: 4.99
available
H45156 Slant Thread Main Drive Gear/121T
retail value: 7.99
available
   
HES35P01 35A Brushless ESC(Governer Mode) HN6103B V2 Metal Tail Rotor Holder/Silver H50119B 500PRO Metal Tail Rotor Holder
HES35P01 35A Brushless ESC(Governer Mode)
retail value: 49.99
Call for availability
HN6103B V2 Metal Tail Rotor Holder/Silver
retail value: 27.99
available
H50119B 500PRO Metal Tail Rotor Holder
retail value: 26.99
available
     
HS1304A Tail Pitch Assembly HS1293AA 450 Landing Skid/Black HS1293A 450 Landing Skid/White
HS1304A Tail Pitch Assembly
retail value: 8.99
Call for availability
HS1293AA 450 Landing Skid/Black
retail value: 6.99
Call for availability
HS1293A 450 Landing Skid/White
retail value: 6.99
Call for availability
     
H45152 Sport V2 Linkage Rod Set H45151 Sport V2 Fuselage Parts H45150 Sport V2 Bottom Plate
H45152 Sport V2 Linkage Rod Set
retail value: 4.99
available
H45151 Sport V2 Fuselage Parts
retail value: 9.99
available
H45150 Sport V2 Bottom Plate
retail value: 6.99
available
     
H45149 Sport V2 Motor Mount H45148 Sport V2 Carbon Main Frame(L) H45147 Sport V2 Carbon Main Frame(U)
H45149 Sport V2 Motor Mount
retail value: 8.99
available
H45148 Sport V2 Carbon Main Frame(L) set
retail value: 11.99
available
H45147 Sport V2 Carbon Main Frame(U) set
retail value: 14.99
available
     
H45146 Sport V2 Metal Main Shaft Bearing Block H45145 Sport V2 Metal Washout Base/New H45144 Sport V2 Flybar Control Rod
H45146 Sport V2 Metal Main Shaft Bearing Block
retail value: 14.99
Call for availability
H45145 Sport V2 Metal Washout Base/New
retail value: 7.99
available
H45144 Sport V2 Flybar Control Rod
retail value: 4.99
available
     
H45143 Sport V2 Metal Flybar Control Set H45142 Sport V2 Metal Mixing Arm (L) H45141 Sport V2 Metal Mixing Arm (U)
H45143 Sport V2 Metal Flybar Control Set
retail value: 16.99
available
H45142 Sport V2 Metal Mixing Arm (L)
retail value: 16.99
Call for availability
H45141 Sport V2 Metal Mixing Arm (U)
retail value: 14.99
available
     
H45140 Sport V2 Metal Flybar Seesaw Holder set H45139 Sport V2 Metal Main Rotor Holder Set H45138 Sport V2 Metal Main Rotor Housing Set
H45140 Sport V2 Metal Flybar Seesaw Holder set
retail value: 9.99
Call for availability
H45139 Sport V2 Metal Main Rotor Holder Set
retail value: 26.99
Call for availability
H45138 Sport V2 Metal Main Rotor Housing Set
retail value: 19.90
Call for availability
     
HT1003A Drive Belt/XL H45022A Main Shaft SPM1451 - Battery/Motor Temp Sensor
HT1003A Drive Belt(XL)
retail value: 7.99
Call for availability
H45022T Main Shaft
retail value: 11.99
Call for availability
SPM1451 Battery/Motor Temperature Sensor
retail value: 9.99
available
   
SPM1501 - Sensor Mnt Hardware:.21-.26 SPMA9550 - NYA2.5" Aircraft Telem Data Lead SPMA9551 - NYA12" Aircraft Telemetry Extension
SPM1501 Sensor Mount Hardware: .21-.26
retail value: 7.99
available
SPMA9551 12" Aircraft Telemetry Extension
retail value: 8.99
available
SPMA9552 - NYA24" Aircraft Telemetry Extension SPMA9553 - NYA2.5" Aircraft Telem Y-Harness SPMA9554 - NYAAirTelemFlghtPckVoltageSnsr: Sx
SPMA9552 24" Aircraft Telemetry Extension
retail value: 9.99
available
SPMA9553 2.5" Aircraft Telemetry Y-Harness
retail value: 13.99
available
SPMA9555 - NYAAirTelemFlghtPckVltageSensor:JST SPMA9570 - NYAAircraftTelemFlightPackVoltSensr SPMA9571 - NYAAircraft Telem Temp Sensor
HF5006 UH-60 500 Scale Fuselage SPMA9574 Aircraft Telemetry Airspeed Indicator SPMA9585 Aircraft Telemetry 3-Axis GForce Sensor: 8G
HF5006 UH-60 500 Scale Fuselage
retail value: 410.99
Call for availability
     
EFLB0701S 70mAh 1S 3.7V 14C LiPo Battery HN7021D 700 CNC Gears Assembly HN7019D CNC Main Drive Gear/115T
EFLB0701S 70mAh 1S 3.7V 14C LiPo Battery
retail value: 4.99
available
HN7021D 700 CNC Gears Assembly
retail value: 44.99
Call for availability
HN7019D CNC Main Drive Gear/115T
retail value: 16.99
Call for availability
   
HN7019-4 CNC Main Drive Gear/164T HN6127 Control Shaft HSP65001 DS650 Servo Gear Set
HN7019-4 CNC Main Drive Gear/164T
retail value: 16.99
Call for availability
HN6127 Control Shaft
retail value: 6.99
Call for availability
HSP65001 DS650 Servo Gear Set
retail value: 26.99
Call for availability
     
HN7076A 700N Tail Case Part Bag H45115A 450FL Linkage Ball HFM09001 90 High Performance Muffler
HN7076A 700N Tail Case Part Bag
retail value: 9.99
Call for availability
H45115A 450FL Linkage Ball
retail value: 4.99
Call for availability
HFM09001 90 High Performance Muffler
retail value: 98.99
available
     
HFM05001 50 High Performance Muffler SAVSA1283SG Savox SA-1283SG Super Torque Steel Gear Digital Servo SAVSC1258TG Savox SC-1258TG Super Speed Titanium Gear Digital Servo
HFM05001 50 High Performance Muffler
retail value: 72.99
available
     
SAVSH0257MG Savox SH-0257MG Super Speed Metal Gear Micro Digital Servo SAVSH0257MG3 Savox SH-0257MG Super Speed Metal Gear Micro Digital Servo - 3 Pack SAVSH1250MG Savox SH-1250MG Super Torque Metal Gear Mini Digital Servo
     
SAVSH1357 Savox SH-1357 Super Speed Mini Digital Servo DYN1405 - Li-Po Charge Protection Bag,Large H50049A 500PRO Canopy Mounting Bolt
DYN1405 LiPo Charge Protection Bag, Large
retail value: 19.99
available
H50049A 500PRO Canopy Mounting Bolt
retail value: 6.99
Call for availability
     
H50019A 145T M0.6 Autorotation Tail Drive Gear set H50015A 500PRO Metal Washout Base H45019A Metal Flybar Control Set
H50019A 145T M0.6 Autorotation Tail Drive Gear set
retail value: 8.99
Call for availability
H50015A 500PRO Metal Washout Base
retail value: 8.99
Call for availability
H45019A Metal Flybar Control Set
retail value: 16.99
available
     
H50016A CCPM Metal Swashplate HMP50M02A 500MX Motor Shaft H50167 500PRO Linkage Ball Assembly
H50016A CCPM Metal Swashplate
retail value: 32.99
Call for availability
HMP50M02A 500MX Motor Shaft
retail value: 12.99
Call for availability
H50167 500PRO Linkage Ball Assembly
retail value: 9.99
Call for availability
     
H50150 500PRO Metal Main Rotor Holder H50149 500PRO Metal Flybar Seesaw Holder H50147 500PRO Metal Main Rotor Housing
H50150 500PRO Metal Main Rotor Holder
retail value: 27.99
available
H50149 500PRO Metal Flybar Seesaw Holder
retail value: 16.99
Call for availability
H50147 500PRO Metal Main Rotor Housing
retail value: 22.99
Call for availability
     
H50151 500PRO Metal Main Rotor Holder Arm H50168 Motor Pinion Helical Gear 12T H50161 500PRO Frame Mounting Block
H50151 500PRO Metal Main Rotor Holder Arm
retail value: 11.99
Call for availability
H50168 Motor Pinion Helical Gear 12T
retail value: 6.99
available
H50161 500PRO Frame Mounting Block
retail value: 21.99
Call for availability
     
H50155 500PRO Metal Flybar Control Arm H50153 500PRO Metal Mixing Arm (U) H50119A 500PRO Metal Tail Rotor Holder
H50155 500PRO Metal Flybar Control Arm
retail value: 15.99
Call for availability
H50153 500PRO Metal Mixing Arm (U)
retail value: 17.99
Call for availability
H50119A 500PRO Metal Tail Rotor Holder
retail value: 26.99
Call for availability
     
H50116A 500PRO Tail Boom Case H50042A 500PRO Motor Mount H50031A 500PRO Carbon Stabilizer/1.6mm
H50116A 500PRO Tail Boom Case
retail value: 13.99
Call for availability
H50042A 500PRO Motor Mount
retail value: 9.99
available
H50031A 500PRO Carbon Stabilizer/1.6mm
retail value: 14.99
Call for availability
     
H50003A 500PRO Main Gear Case Set H50169 500PRO Landing Skid H50166 M0.6 Torque Tube Front Drive Gear Set/36T
H50003A 500PRO Main Gear Case Set
retail value: 23.99
available
H50169 500PRO Landing Skid
retail value: 4.99
Call for availability
     
H50165 500PRO Metal Tail Rotor Control Arm Set H50164 500PRO Tail Control Guide H50163 500PRO Main Frame Parts
H50164 500PRO Tail Control Guide
retail value: 2.99
available
H50163 500PRO Main Frame Parts
retail value: 13.99
available
     
H50162 500PRO Metal Anti Rotation Bracket H50160 500PRO Carbon Bottom Plate/1.6mm H50159 500PRO Carbon Main Frame(R)/1.6mm
H50162 500PRO Metal Anti Rotation Bracket
retail value: 13.99
available
H50160 500PRO Carbon Bottom Plate/1.6mm
retail value: 19.99
Call for availability
H50159 500PRO Carbon Main Frame(R)/1.6mm
retail value: 39.99
available
     
H50158 500PRO Carbon Main Frame(L)/1.6mm H50157 Main Shaft Spacer H50156 500PRO Main Shaft
H50158 500PRO Carbon Main Frame(L)/1.6mm
retail value: 39.99
available
H50157 Main Shaft Spacer
retail value: 2.99
available
H50156 500PRO Main Shaft
retail value: 14.99
Call for availability
     
H50154 500PRO Metal Mixing Arm (L) H50140A 500PRO Tail Rotor Hub H50152 500EFL PRO Metal Main Rotor Holder Arm
H50154 500PRO Metal Mixing Arm (L)
retail value: 17.99
Call for availability
H50140A 500PRO Tail Rotor Hub
retail value: 6.99
available
     
H50148 500EFL PRO Metal Main Rotor Housing H50117A 500PRO Metal Tail Torque Tube Unit H50082B 500PRO Metal Tail Pitch Assembly
H50148 500EFL PRO Metal Main Rotor Housing
retail value: 22.99
Call for availability
H50117A 500PRO Metal Tail Torque Tube Unit
retail value: 39.99
Call for availability
H50082B 500PRO Metal Tail Pitch Assembly
retail value: 13.99
available
     
H50075A 500PRO Metal Main Shaft Bearing Block H50051A 500PRO Aluminum Hexagonal Bolt KX017016 T-REX 500EFL PRO Super Combo
H50075A 500PRO Metal Main Shaft Bearing Block
retail value: 22.99
Call for availability
H50051A 500PRO Aluminum Hexagonal Bolt
retail value: 6.99
Call for availability
KX017016 T-REX 500EFL PRO Super Combo
retail value: $799.99
sale Price: 789.99
You save $10.00!
Call for availability
     
HN6103A V2 Metal Tail Rotor Holder/Silver HEP3GX01 3GX Double Sided Tape H45136 3G Carbon Mount
HN6103A V2 Metal Tail Rotor Holder/Silver
retail value: 27.99
Call for availability
HEP3GX01 3GX Double Sided Tape
retail value: 2.99
available
H45136 3G Carbon Mount
retail value: 5.99
available
     
HN6126 Aluminum Hexagonal Bolt H45028A V2 Carbon Fiber Main Frame/1.2mm
HN6126 Aluminum Hexagonal Bolt
retail value: 6.99
available
H45137 Motor Pinion Gear 15T
retail value: 4.99
available
H45028A V2 Carbon Fiber Main Frame/1.2mm
retail value: 15.99
available
     
H45135 Battery Mount Foam H45117A 450 PRO FL V2 Main Rotor Housing Set/Black KX018E11 T-REX 700E F3C V2 Super Combo
H45135 Battery Mount Foam
retail value: 3.99
available
H45117A 450 PRO FL V2 Main Rotor Housing Set/Black
retail value: 19.99
Call for availability
KX018E11 T-REX 700E F3C V2 Super Combo
retail value: $1,599.99
sale Price: 1,329.99
You save $270.00!
available
     
HN7116 700 Newly Main Rotor Holder KX016017 T-REX 600EFL PRO Super Combo HF5013 500 Scale Fuselage Long Umbrella Gear
HN7116 700 Newly Main Rotor Holder
retail value: 52.99
available
KX016017 T-REX 600EFL PRO Super Combo
retail value: $1,088.99
sale Price: 979.99
You save $109.00!
available
HF5013 500 Scale Fuselage Long Umbrella Gear
retail value: 12.99
Call for availability
     
HF5012 500 Scale Fuselage Tail Gear Plate HF5011 500 Scale Fuselage Angled Tail Transmission Set HF5010 500 Scale Fuselage Short Tail Boom
HF5012 500 Scale Fuselage Tail Gear Plate
retail value: 21.99
Call for availability
HF5011 500 Scale Fuselage Angled Tail Transmission Set
retail value: 8.99
Call for availability
HF5010 500 Scale Fuselage Short Tail Boom
retail value: 19.99
Call for availability
     
HF5009 500 Scale Fuselage Fiberglass Main Frame HC7206 700NB Painted Canopy EFLRDS76 7.6-Gram DS76 Digital Sub-Micro Servo
HF5009 500 Scale Fuselage Fiberglass Main Frame
retail value: 64.99
Call for availability
HC7206 700NB Painted Canopy
retail value: 82.99
Call for availability
     
EFLRDS76T 7.6-Gram Sub-Micro Digital Tail Servo SPM9549 - NYATM1100DSM2Fly-byArcrftTelemMode HD203B 205 Main Blades
EFLRDS76T 7.6-Gram Sub-Micro Digital Tail Servo
retail value: $22.99
sale Price: 18.99
You save $4.00!
available
SPM9549 TM1100 DSMX Fly-By Aircraft Telemetry Module
retail value: $67.99
sale Price: 44.99
You save $23.00!
available
HD203B 205 Main Blades (OLD H25046T)
retail value: 7.99
available
     
H50096A Torque Tube Front Drive Gear Set SPM1450 - Head Temperature Sensor SPMA9569 - NYAAircraftTelemRPMSensor&Bracket
H50096A Torque Tube Front Drive Gear Set
retail value: 14.99
Call for availability
SPM1450 Head Temperature Sensor
retail value: 9.99
available
   
H45134 450FL Metal Control Arm T-REX 450PRO DFC Super Combo KX015087
H45134 450FL Metal Control Arm
retail value: 17.99
Call for availability
EFLRT324 3-Ch2.4GHz Tx w/Built-In LiPochg
retail value: 32.99
available
KX015087 T-REX 450 PRO DFC Super Combo
List Price: $599.99
retail value: $599.99
sale Price: 519.99
You save $80.00!
Call for availability
  Redesigned Trex 450 Pro  Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed. AWESOME!
T-REX 450PRO DFC Combo KX015090 KX018E14   T-REX 700E DFC Super Combo KX018E15  T-REX 700E DFC HV Super Combo
KX015090 T-REX 450 PRO DFC Combo
retail value: $487.99
sale Price: 390.99
You save $97.00!
available
KX018E14 T-REX 700E DFC Super Combo
List Price: $1,499.99
retail value: $1,499.99
sale Price: 1,199.99
You save $300.00!
available
KX018E15 T-REX 700E DFC HV Super Combo
List Price: $1,799.99
retail value: $1,799.99
sale Price: 1,439.99
You save $360.00!
available
this combo is without flybarless electronics" no3gx unit"
Add a Beast-x AR7200x for a super combo discount
call Jeremy @ 508-549-9959
DFC Head, Direct drive cyclic servos and much more... DFC Head, Direct drive HV cyclic servos and much more...
KX019013 T-Rex 250 Pro DFC Combo Helicopter Kit w/Motor/ESC/Servos & CF Blades H70098 700DFC CCPM Metal Swashplate KX0160NPLB T-REX 600 Nitro V2 Limited Edition
H70098 700 DFC Swashplate
retail value: 40.99
available
●Designed specifically for DFC rotorhead system, improving DFC connecting rod's strength and minimizing linkage detachment during extreme flight maneuvers.
●Two ball attachment points allowing pilot to choose between higher control resolution or faster maneuver response.
●6061-T6 Aluminum alloy material and CNC processed。
●Suitable for T-REX 700N/E to install 700DFC Main Rotor Head Upgrade Set (H70089A).
KX0160NPLB T-REX 600 Nitro V2 Limited Edition
H50194 500DFC CCPM Metal Swashplate H45164 450DFC Main Rotor Holder Set H45165 450DFC Main rotor grip arm integrated control link set
H50194 500DFC CCPM Metal Swashplate
retail value: 32.99
Call for availability
H45164 450DFC Main Rotor Holder Set
retail value: 27.99
Call for availability
H45165 450DFC Main rotor grip arm integrated control link set
retail value: 17.99
Call for availability
Suitable for T-REX 500 to install 500DFC Main Rotor Head Upgrade Set (H50181). Use for T-REX450DFC Suitable for T-REX 450DFC. H45162/162QN
H45166 450DFC Main Shaft H45167 450DFC Head Damper H45182 450DFC Linkage Rod Set
H45166 450DFC Main Shaft
retail value: 11.99
Call for availability
H45167 450DFC Head Damper
retail value: 3.99
available
H45182 450DFC Linkage Rod Set
retail value: 5.99
available
Use for T-REX 450DFC. H45162/162QN Use for T-REX 450DFC. H45162/16QN Use for T-REX 450DFC(H45162/45162QN).
H45188 450DFC CCPM Metal Swashplate/Black H45188QN 450DFC CCPM Metal Swashplate/Blue H45190 450DFC Main Rotor Housing Set/Black
H45188 450DFC CCPM Metal Swashplate/Black
retail value: 27.99
Call for availability
H45188QN 450DFC CCPM Metal Swashplate/Blue
retail value: 27.99
Call for availability
H45190 450DFC Main Rotor Housing Set/Black
retail value: 14.99
Call for availability
Suitable for T-REX 450 to install 450DFC Main Rotor Head Upgrade Set (H45162). Suitable for T-REX 450 to install 450DFC Main Rotor Head Upgrade Set (H45162). Use for T-REX450DFC.(H45162)
BLH3880 Red Bull BO-105 CB 130 X BNF
BLH3880 Red Bull BO-105 CB 130 X BNF
retail value: 199.99
available
RH70N01X T-REX 700 Nitro DFC Super Combo
retail value: $1,282.99
sale Price: 1,026.99
You save $256.00!
available
KX018E11A T-REX 700E F3C V2 Super Combo
retail value: $1,599.99
sale Price: 1,329.99
You save $270.00!
available
RH55E01X T-REX 550E DFC Super Combo RH25E03X T-REX 250 PLUS DFC BTF
RH70E04X T-REX 700E DFC HV Combo
retail value: $1,680.99
sale Price: 1,344.99
You save $336.00!
available
RH55E01X T-REX 550E DFC Super Combo
retail value: $1,019.99
sale Price: 815.99
You save $204.00!
Call for availability
RH25E03X T-REX 250 PLUS DFC BTF
retail value: $369.99
sale Price: 329.99
You save $40.00!
available
RH25E04X T-REX 250 PLUS DFC RTF KX019013A T-REX 250 PRO DFC Combo KX019011A T-REX 250 PRO DFC Super Combo
RH25E04X T-REX 250 PLUS DFC RTF
retail value: $478.99
sale Price: 429.99
You save $49.00!
available
KX019013A T-REX 250 PRO DFC Combo
retail value: $349.99
sale Price: 299.99
You save $50.00!
available
KX019011A T-REX 250 PRO DFC Super Combo
retail value: $486.99
sale Price: 419.99
You save $67.00!
available
SPM9900 DX9 Black Edition System w/ AR9020 Receiver
SPM9900 DX9 Black Edition System w/ AR9020 Receiver
retail value: $689.99
sale Price: 599.99
You save $90.00!
available