G-Force DX7/9303 Neck Strap Balancer
G-Force new balancer (Part #GFA7000) for the 2.4GHz transmitters
- DX7 and X9303 has been designed to be low profile and to match
the styling of the radios.
. Uses standard o-rings for easy tuning and consistent dampening.
. Triple bolt for rigid head mounting.
. Triple o-rings per side of the head.
. Two mounting bolts head button to eliminate loss.
. Adjustable phase block.
. Robust design for zero flex in hard 3D flying
. Kit includes o-rings for normal and 3D flying.
. Uses the d4xD8xW3 seesaw bearings from your original head.
. Works with both TT plastic and metal blade grips.
. Configured for aggressive 3D flying
. Up to +/-13 degrees for your collective
. Uses your stock bearings and pivot balls.
. Uses the d4xD7W2.5 bearings from your stock mixers.
. Designed for the G-Force Tuner head but will work with stock TT head.
. One piece design for precision flybar cyclic input
. Tuneable pivot locations, outer for 3D, inner for increased cyclic input
. Uses your stock pivot balls.
. Designed for the G-Force Tuner head but will work with stock TT head.
. New Boom mounting location (Stronger triangular support for the tail boom)
. Independent Landing Skid Mounting (Withstands hard landings)
. Large Engine Opening (Easy removal of all OS and YS 91 engines.)
. Engine Mount Brace (Transfers all available power to the head and keeps engine aligned with clutch bell)
. 6mm thick CNC Machined lightweight aluminum (Makes the bottom frame rigid)
. Weighs 73 grams
Now instock
The G-Force Static Wick works on all size helis and is designed like the full size system to discharge static quickly, reducing static interference.
The following are videos showing how much static can be generated from a T-Rex 450 and T-Rex 500 tail blades, even spooled up manually at low speeds.
